|
|
|
|
|
|
|
|
|
|
|
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel NBK Main body Black (Ferrosoferric Oxide Film S45C) One Collar NBK - Made in Japan
|
Characteristics:- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
- This avoids interference of the set collar with the external wheel when the bearing is fixed..
|
Part Number | d | B | D | D1 | M*1 | NSC-3-8-C-NBK | 3mm | 8mm | 7mm | - | M3 | ?1????If d dimension is 6 or below, one point.
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film NSC-3-8-C-NBK
|
NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan
|
Characteristics:
- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
- This avoids interference of the set collar with the external wheel when the bearing is fixed.
.
|
Part Number
|
d
|
B
|
D
|
D1
|
M *1
|
Quantity Per Pack
|
NSC-3-6-M-NBK
|
3mm |
6mm |
7mm |
-
|
M3
|
1
|
NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan
NSC-3-6-M-NBK
|
NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
|
Characteristics:
- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
- This avoids interference of the set collar with the external wheel when the bearing is fixed.
.
|
Part Number
|
d
|
B
|
D
|
D1
|
M *1
|
Quantity Per Pack
|
NSC-3-8-M-NBK
|
3mm |
8mm |
7mm |
-
|
M3
|
1
|
NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
NSC-3-8-M-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSC-3-6-C NBK Set Collar - Set Screw Type - Steel NBK Main body Black (Ferrosoferric Oxide Film S45C) One Collar NBK - Made in Japan
|
Characteristics:- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
- This avoids interference of the set collar with the external wheel when the bearing is fixed..
|
Part Number | d | B | D | D1 | M*1 | NSC-3-6-C-NBK | 3mm | 6mm | 7mm | - | M3 | ?1????If d dimension is 6 or below, one point.
NSC-3-6-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film NSC-3-6-C-NBK
|
NSC-3-6-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type Main body (Stainless Steel SUS304 ) One Collar NBK - Made in Japan
|
Characteristics:
- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
-
This avoids interference of the set collar with the external wheel when the bearing is fixed..
|
Part
Number
|
d
|
B
|
D
|
D1
|
M*
1
|
NSC-3-6-S-NBK
|
3mm
|
6mm
|
7mm
|
-
|
M3
|
*1: If d dimension is 6 or below, one point.
NSC-3-6-S NBK Set Collar - Set Screw Type Stainless Steel
NSC-3-6-S-NBK
|
NSC-3-8-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type Main body (Stainless Steel SUS304 ) One Collar NBK - Made in Japan
|
Characteristics:
- Standard type set collar.
- It is attached to the shaft by the set screws.
- Chamfer on one side end face is larger (bore diameter 8 mm or above).
-
This avoids interference of the set collar with the external wheel when the bearing is fixed..
|
Part
Number
|
d
|
B
|
D
|
D1
|
M*
1
|
NSC-3-8-S-NBK
|
3mm
|
8mm
|
7mm
|
-
|
M3
|
*1: If d dimension is 6 or below, one point.
NSC-3-8-S NBK Set Collar - Set Screw Type Stainless Steel
NSC-3-8-S-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSC-3-6-SP2 NBK Steel Set Collar - with Installation Hole - Set Screw Type Main body Ferrous ferric Oxide S45C Film (Black) Hex Socket Set Screw Ferrous ferric Oxide SCM435 Film (Black) NBK - Made in Japan
|
Characteristics:
- Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole.
- It is attached to the shaft by the set screws.
|
Part
Number
|
d
|
B
|
D
|
S
|
P
|
M*
1
|
NSC-3-6-SP2-NBK
|
3mm
|
6mm
|
17mm
|
3.4mm
|
11mm
|
M3
|
●Hex socket set screw is provided.
*1 : If d dimension is 5 or below, one point.
NSC-3-6-CP2 NBK Set Collar - Set Collar - with Installation Hole - Set Screw Type - Ferrosoferric Oxide
NSC-3-6-CP2-NBK
|
NSCS-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
|
Characteristics:
- Main body: S45C-Electrolysis-Nickel Plating
- Hex Socket: SUSXM7
- Standard type set collar.
- It is attached to the shaft by the set screws.
- Installation and removing are easy. Moreover this does not scratch the shaft.
- Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.
.
|
Part Number
|
d
|
B
|
D
|
F
|
M
|
Quantity Per Pack
|
NSCS-3-8-M-NBK
|
3mm
|
8mm
|
15mm
|
4.5
|
M3
|
1
|
NSCS-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
NSCS-3-8-M-NBK
|
NSC-3-6-SP2 NBK Steel Set Collar - with Installation Hole - Set Screw Type Main body ( SUS304 - Steel ) Hex Socket Set Screw ( SUSXM7 ) NBK - Made in Japan
|
Characteristics:
- Set collar with installation hole. It can be installed to any machine and device such as wheels, flanges and plates, by using the fixing hole.
- It is attached to the shaft by the set screws.
|
Part
Number
|
d
|
B
|
D
|
S
|
P
|
M*
1
|
NSC-3-6-SP2-NBK
|
3mm
|
6mm
|
17mm
|
3.4mm
|
11mm
|
M3
|
●Hex socket set screw is provided.
*1 : If d dimension is 5 or below, one point.
NSC-3-6-SP2 NBK Set Collar - Set Collar - with Installation Hole - Set Screw Type Steel
NSC-3-6-SP2-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSCS-3-8-C NBK Set Collar - Clamping Type - Steel
with Hexagon Socket Bolt SS400 - Hex Socket Head Cap Screw-Black
Main body Black (Ferrosoferric Oxide Film S45C) One Collar NBK - Made in Japan
|
Characteristics:
- Clamping type set collar.
- Installation and removing are easy. Moreover this does not scratch the shaft.
- Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.
|
Part
Number
|
d
|
B
|
D
|
F
|
M
|
NSCS-3-8-C-NBK
|
3mm
|
8mm
|
15mm
|
4.5mm
|
M3
|
*Hex socket head cap screw is provided
NSCS-3-8-C NBK Set Collar - Clamping Type - Steel Ferrosoferric Oxide Film - Black
NSCS-3-8-C-NBK - Japan
|
NSCSS-3-8-C NBK Set Collar Split type - Steel
SCM435 Hex Socket Head Cap Screw
Main body Black (Ferrosoferric Oxide Film S45C) One Collar NBK - Made in Japan
|
Characteristics:
- Split-type set collar.
- As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
- Optimal for use with machines and devices that are difficult to disassemble
|
Part
Number
|
d
|
B
|
D
|
F
|
M
|
NSCSS-3-8-C-NBK
|
3mm
|
8mm
|
15mm
|
4.5mm
|
M3
|
*Hex socket head cap screw is provided
NSCSS-3-8-C NBK Set Collar - Split Type - Steel Ferrosoferric Oxide Film - Black
NSCSS-3-8-C-NBK - Japan
|
NSCS-3-8-S NBK Set Collar - Clamping Type
Hex Socket Head Cap Screw SUSXM7 Main body SUS304 Steel One Collar NBK - Made in Japan
|
Characteristics:
- Clamping type set collar.
- Installation and removing are easy. Moreover this does not scratch the shaft.
- Optimal for machines and devices that are frequently mounted/removed, e.g. slide shaft.
|
Part
Number
|
d
|
B
|
D
|
F
|
M
|
NSCS-3-8-S-NBK
|
3mm
|
8mm
|
15mm
|
4.5mm
|
M3
|
*Hex socket head cap screw is provided
NSCS-3-8-S NBK Set Collar - Clamping Type - Steel Made in - Japan
NSCS-3-8-S-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSCSS-3-8-M NBK Set Collar Split type - Steel
Main body ( S45C Electroless Nickel Plating ) SUSXM7 Hex Socket Head Cap Screw One Collar NBK - Made in Japan
|
Characteristics:
- Split-type set collar.
- As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
- Optimal for use with machines and devices that are difficult to disassemble
|
Part
Number
|
d
|
B
|
D
|
F
|
M
|
NSCSS-3-8-M-NBK
|
3mm
|
8mm
|
15mm
|
4.5mm
|
M3
|
*Hex socket head cap screw is provided
NSCSS-3-8-M NBK Set Collar - Split Type - Steel Electroless Nickel Plating
NSCSS-3-8-M-NBK
Made in Japan
|
NSCSS-3-8-S NBK - Stainless Steel
Main body ( SUS304 Stainless Steel ) SUSXM7 Hex Socket Head Cap Screw One Collar NBK - Made in Japan
|
Characteristics:
- Split-type set collar.
- As the axial hole part can be completely split, so mounting and removing can be performed easily. Moreover this does not scratch the shaft.
- Optimal for use with machines and devices that are difficult to disassemble
|
Part
Number
|
d
|
B
|
D
|
F
|
M
|
NSCSS-3-8-S-NBK
|
3mm
|
8mm
|
15mm
|
4.5mm
|
M3
|
*Hex socket head cap screw is provided
NSCSS-3-8-S NBK Set Collar Split Type
Stainless Steel
NSCSS-3-8-S-NBK
Made in Japan
|
NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-3-8-SB-NBK | 3mm | 8.5mm | 7.5mm | 15 | 5 | 4.5 | M3 | 693ZZ?623ZZ |
NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-3-8-SB-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-4-8-SB-NBK | 4mm | 8.5mm | 7.5mm | 15 | 5 | 4.5 | M3 | 694ZZ?624ZZ |
NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-4-8-SB-NBK
|
NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-8-8-SB1-NBK | 8mm | 8.5mm | 7.5mm | 20 | 11.7 | 7 | M3 | ?608ZZ? |
NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-8-8-SB1-NBK
|
NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-8-8-SB2-NBK | 8mm | 8.5mm | 7.5mm | 20 | 13.2 | 7 | M3 | ?628ZZ? |
NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-8-8-SB2-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-8-8-SB3-NBK | 8mm | 8.5mm | 7.5mm | 20 | 11.2 | 7 | M3 | ?698ZZ? |
NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-8-8-SB3-NBK
|
NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-5-8-SB-NBK | 5mm | 8.5mm | 7.5mm | 20 | 7.2 | 6 | M3 | 695ZZ?606ZZ?625ZZ |
NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-5-8-SB-NBK
|
NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-10-11-SB1-NBK | 10mm | 11mm | 9mm | 30 | 14.7 | 9 | M4 | ?6000ZZ? |
NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNSCS-10-11-SB1-NBK
|
|
|
|
|
|
|
|
|
|
|
|
|
NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-10-11-SB2-NBK | 10mm | 11mm | 9mm | 30 | 17.2 | 9 | M4 | ?6200ZZ? |
NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-10-11-SB2-NBK
|
NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-10-11-SB3-NBK | 10mm | 11mm | 9mm | 30 | 14.2 | 9 | M4 | ?6200ZZ? |
NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNSCS-10-11-SB3-NBK
|
NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-6-8-SB1-NBK | 6mm | 8.5mm | 7.5mm | 20 | 9.4 | 6.5 | M3 | ?606ZZ? |
NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-6-8-SB1-NBK
|
|
|
|
|
|
|
|
|
|
|
NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-6-8-SB2-NBK | 6mm | 8.5mm | 7.5mm | 20 | 9.7 | 6.5 | M3 | ?626ZZ? |
NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-6-8-SB2-NBK
|
NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan |
Characteristics:- Main BodySUS304
- Hex Socket Head Cap ScrewSUSXM7
- Standard type set collar.
- It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
- Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
- Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
.
|
Part Number | d | B | B1 | D | D1 | F | M | Applicable bearings | NSCS-6-8-SB3-NBK | 6mm | 8.5mm | 7.5mm | 20 | 9.1 | 6.5 | M3 | ?696ZZ? |
NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in JapanNNSCS-6-8-SB3-NBK
|
|