Home > View All > Collar Outer > 7mm
We found 18 results matching your criteria.
Sort By:
Page of 1
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel NBK Ferrosoferric Oxide Film Pack of 1 Collar Made in Japan NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan
NSC-3-8-C NBK Set Collar - Set Screw Type - Steel NBK
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part NumberdBDD1M*1
NSC-3-8-C-NBK 3mm8mm7mm -M3
‹¬?1‹¬????If d dimension is 6 or below, one point.

NSC-3-8-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film

NSC-3-8-C-NBK
NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan



Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed.
    • .


Part Number d B D D1 M *1 Quantity Per Pack
NSC-3-6-M-NBK 3mm 6mm 7mm - M3 1

NSC-3-6-M NBK Set Collar - Set Screw Type. Made in Japan

NSC-3-6-M-NBK
NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan



Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed.
    • .


Part Number d B D D1 M *1 Quantity Per Pack
NSC-3-8-M-NBK 3mm 8mm 7mm - M3 1

NSC-3-8-M NBK Set Collar - Set Screw Type. Made in Japan

NSC-3-8-M-NBK
NSC-3-6-C NBK Set Collar - Set Screw Type - Steel NBK Ferrosoferric Oxide Film Pack of 1 Collar Made in Japan NSC-3-6-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type - NBK - One Collar Made in Japan NSC-3-8-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type - NBK - One Collar Made in Japan
NSC-3-6-C NBK Set Collar - Set Screw Type - Steel NBK
Main body Black (Ferrosoferric Oxide Film S45C)
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part NumberdBDD1M*1
NSC-3-6-C-NBK 3mm6mm7mm -M3
‹¬?1‹¬????If d dimension is 6 or below, one point.

NSC-3-6-C NBK Set Collar - Set Screw Type - Steel Ferrosoferric Oxide Film

NSC-3-6-C-NBK
NSC-3-6-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type
Main body (Stainless Steel SUS304 )
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part Number d B D D1 M* 1
NSC-3-6-S-NBK 3mm 6mm 7mm -
M3
＊1: If d dimension is 6 or below, one point.

NSC-3-6-S NBK Set Collar - Set Screw Type Stainless Steel

NSC-3-6-S-NBK
NSC-3-8-S NBK Steel Collar - Set Screw Hex Socket SUSXM7 Type
Main body (Stainless Steel SUS304 )
One Collar
NBK - Made in Japan

Characteristics:
  • Standard type set collar.
  • It is attached to the shaft by the set screws.
  • Chamfer on one side end face is larger (bore diameter 8 mm or above).
  • This avoids interference of the set collar with the external wheel when the bearing is fixed..



Part Number d B D D1 M* 1
NSC-3-8-S-NBK 3mm 8mm 7mm -
M3
＊1: If d dimension is 6 or below, one point.

NSC-3-8-S NBK Set Collar - Set Screw Type Stainless Steel

NSC-3-8-S-NBK
NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan
NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-3-8-SB-NBK3mm 8.5mm7.5mm 15 5 4.5 M3693ZZ?Ÿ¯623ZZ

NSCS-3-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-3-8-SB-NBK
NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-4-8-SB-NBK4mm 8.5mm7.5mm 15 5 4.5 M3694ZZ?Ÿ¯624ZZ

NSCS-4-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-4-8-SB-NBK
NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB1-NBK8mm 8.5mm7.5mm2011.77 M3?Ÿ¯608ZZ?Ÿ¯

NSCS-8-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB1-NBK
NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan
NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB2-NBK8mm 8.5mm7.5mm2013.27 M3?Ÿ¯628ZZ?Ÿ¯

NSCS-8-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB2-NBK
NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-8-8-SB3-NBK8mm 8.5mm7.5mm2011.27 M3?Ÿ¯698ZZ?Ÿ¯

NSCS-8-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-8-8-SB3-NBK
NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-5-8-SB-NBK5mm 8.5mm7.5mm207.26 M3695ZZ?Ÿ¯606ZZ?Ÿ¯625ZZ

NSCS-5-8-SB NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-5-8-SB-NBK
NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan
NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB1-NBK10mm 11mm9mm3014.79M4?Ÿ¯6000ZZ?Ÿ¯

NSCS-10-11-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NSCS-10-11-SB1-NBK
NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB2-NBK10mm 11mm9mm3017.29M4?Ÿ¯6200ZZ?Ÿ¯

NSCS-10-11-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-10-11-SB2-NBK
NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-10-11-SB3-NBK10mm 11mm9mm3014.29M4?Ÿ¯6200ZZ?Ÿ¯

NSCS-10-11-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NSCS-10-11-SB3-NBK
NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan
NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB1-NBK6mm 8.5mm7.5mm209.46.5 M3?Ÿ¯606ZZ?Ÿ¯

NSCS-6-8-SB1 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB1-NBK
NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB2-NBK6mm 8.5mm7.5mm209.76.5 M3?Ÿ¯626ZZ?Ÿ¯

NSCS-6-8-SB2 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB2-NBK
NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing
Clamping Type. Made in Japan



Characteristics:
  • Main BodySUS304
  • Hex Socket Head Cap ScrewSUSXM7
  • Standard type set collar.
  • It can be fixed by pressing the bearing inner wheel only on the convex of the main body.
  • Optimal for securing bearing when it is difficult to fix the snap ring, etc. to the shaft.
  • Clamping Type. Mounting and removing are easy. Moreover this does not scratch the shaft.
    • .


Part Number d B B1 D D1 F M Applicable bearings
NSCS-6-8-SB3-NBK6mm 8.5mm7.5mm209.16.5 M3?Ÿ¯696ZZ?Ÿ¯

NSCS-6-8-SB3 NBK Stainless Steel Set Collar For Securing Bearing Clamping Type. Made in Japan

NNSCS-6-8-SB3-NBK
   
 
Collar Outer, 7mm

7mm

Collar Outer